. The injection system of servo devices (low consumption) has two jacks.
which is installed on the chassis and linear axes. Similar to what in
High speed devices are used. Essen system, accuracy of injection
And it greatly improves the stability of material loading.
. The movement structure of the injection unit is proportional to the carriage cylinders.
This structure prevents material leakage when injecting at high speed and pressure.
The injection and loading part is located on the linear guide and due to the short distance from the injection center
It creates less torque, which causes no recoil of the cylinder during injection and smooth loading.
- The possibility of using multi-stage injection (speed - pressure - position)
- The possibility of using multi-stage material acquisition (speed - pressure - position)
- Using two cylinders for injection to move the spiral forward
- Ability to control cylinder temperature automatically
- The device is equipped with a multi-stage system of material acquisition speed, time and position
- Adjusting the material compression pressure at the time of loading
- Controlling the change of the injection state to the pressure behind the injection
- He saw the end of the injection on the monitor
- Control of the entire injection stage by an electronic ruler
- The steel material of the nozzle is very resistant and high quality
- Spiral rotation control before material melting
- The injection control system is different in 5 stages
- The system for cleaning the materials inside the cylinders of Mardons of sizes A-B-C-D
- The possibility of using special Mardon cylinders for industrial materials (by metal)
- The possibility of controlling the temperature of the cylinder by PID method
- The cylinder is equipped with a rotating water system in the throat part
- The cylinder is equipped with high temperature ceramic elements
- Multi-stage control of speed, pressure, location, opening and closing of clamp
- The machine is equipped with electrical and hydraulic mechanical protection systems
- The clamp has a system of 5 double joints
- The Pran genas system is designed with a lot of variety according to the type of part
- The clamp includes a central lubrication system, controlled by PLC
- The clamp is equipped with a high speed system, in the direction of opening and closing
- The clamp is also equipped with a safety lock
- Adjusting the height of the mold, by commanding the hydraulic motor with PLC
- All main rods are equipped with chrome water coating
- Water divider for mold cooling
- Precise control with and closed clip by electronic ruler
- control type of spring (pneumatic _ hydraulic _ shock)
- Using the anti-wear resistance system for the moving plate
- The cast iron plates of the clamp with the highest accuracy and maximum tensioning, cause the least amount of complexity as well as the lack of difference in size in the adjustable size of the clamp.
. The technology used in the hydraulic unit is highly efficient, including the servo system (low consumption).
The drive and pump are servo, the energy consumption is intelligently controlled based on the pressure and speed factors in the production cycle.
Energy saving, accuracy and speed are the advantages of this technology.
. The special design of hydraulic valves has effectively reduced the pressure drop and increased its efficiency and facilitates oil supply.
The servo pump system is protected from excessive heat production and by cooling
Built in, it greatly reduces water consumption. System connections and seals
Hydraulics removes oily pollutants according to environmental standards
- The possibility of using a robot
- Archiving information of templates and also the possibility of saving in USB
- The possibility of setting technical and advanced information
- Show cylinder temperature
- Accurate use of electronic rulers
- Having a warning system
- The machine's current production conditions are shown on the machine's monitor
- LCD device is equipped with several languages of the world
- By using the components and parts in the design and construction of the power system, the command makes it impossible to interfere with any interference during the operation of the device.
- The system is designed in such a way that it provides as many passwords as needed to lock the device
- Protection of data input and operator data by hardware lock
- Real-time production report
- The panel cabinet is sealed with waterproof rubber and prevents water from entering the cabinet
- SSR system is used instead of contactor in all the devices panel
![](https://milankala.ir/wp-content/uploads/2023/01/02-4.png)
Reviews
There are no reviews yet.